Diodes as Input Protection - DevXplained

They are a very effective protection against over voltage and reverse polarity. Let's look at how diodes can be used as input protection.

With competitive price and timely delivery, Hornby Electronic sincerely hope to be your supplier and partner.

Diodes as Input Protection

In the last article, we looked at flyback diodes and how they can be used to protect circuits with inductive loads. Today, we will look at another kind of protection diodes: input protection diodes.

Imagine you want to use your Arduino Uno to build a voltmeter. You can easily do this by using one of its analog input. However, it would be horrible if a too high voltage or an accidental reverse voltage would destroy the whole Arduino. Input protection diodes can protect against this. Let's see how.

The Circuit

The circuit looks more complex than it is. In essence the connection to the analog pin A0 and GND is routed through the protection circuit on the breadboard. The current is limited by a 10 kΩ resistor. Two diodes, one connected to the 5V supply rail and one connected to GND, provide the protection. Because of them, the circuit is safe even if one measures the voltage of a 9 V battery or accidentally swaps the leads.

Want to try it for yourself? You can use the code below.

How does it work?

How does the circuit work? Let's have a look at two different cases and how the diodes protect in them:

For more ultrafast bridge rectifierinformation, please contact us. We will provide professional answers.

1. If the input voltage is higher than the supply voltage, the 5 V pin is more negative than the input voltage. If the input voltage is around 0.2 V higher than the supply voltage the upper diode begins to conduct. This limits the maximum voltage on the analog input A0 to around 5.2 V.
2. If the input voltage is below 0 V, e.g., because the leads have been accidentally swapped, the GND pin is more positive than the input voltage. If the input voltage is around 0.2 V below zero the lower diode begins to conduct. This limits the minimum voltage on the analog input A0 to around - 0.2 V.

Note, that the values above are for schottky diodes, for standard silicon diodes they are higher. The resistor plays a vital part in limiting the overall current. If its value is too small the diodes could overheat while they conduct.

So we now know how the protection circuit works, but what about the measurement results? Well, we can't expect the Arduino to measure voltages outside its measurement range. The measurement value will clip at 5 V in case of overvoltage and at 0 V in case of reverse polarity.

Protection Diodes in ICs

Protection diode is a type of power diode that is used to protect the electronic devices from reverse polarity connection issues and transients overvoltages such as ESD (electro-static discharge) pulse, EFT (electrical fast transients) pulse.

These diodes are ideal for use in applications such as hand−held portable applications, networking, telecom, data and signal lines, microprocessors & MOS memory, AC power lines, and telecommunication equipment, automotive electronics, serial and parallel ports, notebooks, desktops, servers,  ESD protection of signals in HDTV, server interconnects, PC monitors, and PC peripherals.

 Transient Voltage Suppressor Diode (also called TVS Diode or ESD protection diode) is a protection diode designed to protect electronic devices against transient overvoltages like ESD pulse and EFT pulse. It is a PN junction diode with a wide PN junction area to handle large current and has VI characteristics similar to a Zener diode.  The TVS diode is connected across the device to be protected.