5 Must-Have Features in a HDPE Parts

5 Things you must know about HDPE pipes 

High density-polythene pipe also known as HDPE pipe got into limelight for its high demand in agriculture, municipal and industrial water applications. It is the most used plastic material today. PE pipes come in various density ranges starting from very low density, cross-linked, ultra low molecular weight, high molecular weight, medium-density, ultra-high medium-density & linear low- density. There isn’t much difference in the density of higher density polythene and lower density polythene. The density of HDPE can vary between 920 to 970 kg/m3. This blog will help you get a quick understanding regarding HDPE pipes:

Please visit our website for more information on this topic.

Let’s get this basic understanding regarding the difference between HDPE pipes and PE pipes. Are these both the same?

This has been a topic of contention whether these two are different or not. HDPE pipe is among the many classifications of PE pipes. PE pipes can be divided into Low Density Polyethylene Pipe (LDPE), Medium Density Polyethylene Pipe (MDPE) & High Density Polyethylene pipe (HDPE). HDPE pipe has higher molecular weight making it more wear resistant.

Polyethylene plastic pipe (PE) is one of the most basic with excellent chemical resistant properties used in areas of industrial and domestic water while HDPE pipes or high Density Polyethylene Pipes have characteristics that makes it the most preferable choice for agriculture, Domestic and Industrial requirements.

Below mentioned are the 5 major insights about HDPE pipes that will help you to get a decent information about HDPE pipes and its applications in various agriculture water requirements:

HDPE Pipes are Known For its Leak-free feature.

Let’s first know how two HDPE pipes are actually connected. The most common way to connect two HDPE pipes is through “BUTT FUSION ” also termed as butt welding. Out of the many benefits of butt fusion is that, when fused together, it can form a one piece fully welded pipeline that helps in the easy flow of fluid and can withstand any pressure. The other ways are electrofusion, socket welding, extrusion welding but the most common is the butt welding. This way of interconnecting two pipes leaves behind no chances of leakage.

HDPE is not only easy to install and cost effective but rarely requires any maintenance.

HDPE pipes have a rapture prolongation of more than 500% and can withstand earthquakes & landslides without getting affected. HDPE pipes, when installed properly, can withstand both traffic pressure as well as the soil pressure. These pipes have high abrasion qualities making it the most suitable choice for industrial piping systems. HDPE pipes are lightweight pipes that are fused together making it easy to maneuver. Being compatible with extreme weather conditions, HDPE pipes require less maintenance charges and overseeing activities. Iron pipes corrode whereas plastic pipes break because of which the regular visit and maintenance of these pipes becomes a necessity.

HDPE pipes are among the best budget-friendly innovations with extended service life.

Preferring to pipes that last long and are pocket-friendly generates a lot of value in the infrastructure sector. With very low maintenance cost and easy to install features, these pipes have become the best cost-effective option. The service life of HDPE pipes is estimated to be between 50-100 years depending on the installation, usage and design of the pipes making  them ideal for agriculture, industrial & petroleum requirements. Iron pipes and plastic pipes generally get affected due to extreme pressure and corrosion.

HDPE pipes are passive to chemicals.

Today various industries have moved towards HDPE pipes because of its chemical resistant applications. Metal pipes are being replaced by HDPE pipes to carry various fluids and gas. HDPE pipes offer an unmatched chemical and corrosion resistance. Being non-corrosive, HDPE pipes are most acceptable in hostile environment conditions and can be used in saline environments. The flint water crisis can’t happen if the pipes aren’t capable of leaching lead in the water.

HDPE pipes are referred to as the best sustainable option and are ecological.

When compared to other pipes, HDPE pipes are easily recyclable and are highly biodegradable. HDPE pipes, these days are made from recycled materials where pre-consumer material. The energy required to produce HDPE pipes is minimal when compared to other pipes. Manufacturing HDPE plastic requires only a fraction of the energy making it an Eco-friendly choice. Owing to its properties of being non toxic and inert, HDPE is non- hazardous for transportation of portable water. It generally takes   HDPE pipes, known as the most ecological plastic as it does not generate & releases harmful fumes into the environment.

What You Need to Know About HDPE Irrigation Piping

When it comes to installing durable and reliable irrigation piping on your farm, HDPE Irrigation Piping is the answer you are looking for. We at Powerflex Fence strongly believe that water pipes and water products need to be long lasting, affordable, and should survive harsh climatic conditions. Not all irrigation piping systems are equal. Regular PVC piping can contaminate water, become brittle from weather, and cost much more money in the long run than a quality irrigation system using HDPE piping. PVC is much more labor intensive due to the gluing of many joints, and will need excavation to install in the ground. HDPE water pipe can be trenched in the ground via contractor and has 20 year warranty when placed in the ground and 10 year warranty above ground.  HDPE water pipe can be installed seamless until the first joint equaling less chance of leaks. High density polyethylene (HDPE) piping systems have been used for municipal and industrial water applications for decades, and offer a reliable and safe solution for a grazer.  

We are confident in our HDPE Irrigation piping, which is in demand from grazers all over the country. HDPE (High-Density Polyethylene) irrigation pipes have been in use for many years, be it for commercial, residential, or irrigation purposes. When compared to PVC pipes, HDPE has fewer failure ratings, can easily dampen shock waves, are abrasion resistant, and heat resistant, resulting in an overall superior product. This piping is a HOT COMMODITY! Start Planning ahead… Call us for availability information and information on your setup options. There are 2 types of HDPE pipe. Inside controlled diameter (ASTM D-) and Outside controlled diameter (ASTM D-). We supply Outside controlled diameter (ASTM D-). 200 PSI. HDPE pipe often laid on top of the ground, giving flexibility for the times of the year when you’re not having hard freezes. We recommend burying into the ground but HDPE can be placed on top of the ground until you decide where to place your watering system. 

20 year buried warranty

10 year above ground warranty

HDPE water pipe will expand to 12%

Water can only expand to 9%

Recyclable   

Freeze-proof waterers can be installed sparingly for winter grazing when the grass is dormant and protecting regrowth is not a concern. The other times of the year, above ground water systems can be used to allow you better utilization of your pasture by dividing it with portable fencing, and bringing the water to the smaller paddocks instead of using lanes. HDPE offers affordable irrigation piping, high-quality build, harsh climatic operations, chemical resistance, and near zero maintenance. In this post we cover key features, functioning & installation of HDPE Irrigation piping for you to understand why HDPE piping is your superior livestock watering solution.

Purchasing piping alone is not enough. You will need a variety of adapters, tee's, end caps, coupler valves, and more to make your setup adaptable and easy to use. Let's look at some of the common components needed for your typical livestock HDPE irrigation setup:

Goto Flytoo to know more.

Powerflex 3/4"​​ HDPE irrigation in use

HDPE Irrigation Standard Tee

This fitting can be used to divide your HDPE irrigation into three different directions. In addition, the "reducing standard tee", a variation of the standard tee, can be used when you need to split off from one larger diameter line to a smaller diameter line.

HDPE Irrigation Female Tee

Used for hooking up a quick coupler valve to your HDPE irrigation. Adding female tee's throughout the line allows you to easily tap into your irrigation tanks at any point in the line.

HDPE Irrigation Quick Coupler Valve

The quick coupler vale taps into a female tee (shown above) so that you can easily tap into a hose or irrigation tank using a riser (shown below). It screws into the female tee and remains in place for easy access.

HDPE Irrigation Riser for Quick Coupler Valve

The riser for quick coupler valve can easily attach to a standard hose, and slides directly into the quick coupler valve, snapping in to place and allowing for water to flow freely from your HDPE irrigation line and into your watering tank. A float valve in your watering tank can then stop the flow of water once the tank is filled.

Jobe Valve

A Jobe Valve, or another form of float valve will be required for your watering tank, so that the water flowing in from your quick coupler valve will be cut off once the tank is filled.

HDPE Irrigation End Cap

Used to cap off the end of lines that do not have a connecting point with another line.

There is a wide variety of fittings and sizes for livestock hdpe irrigation:

Always make sure to shop based on the correct diameter of your HDPE piping. Piping size may be 2 inches, 1 and 1/2 inch, 1 inch, 1 and 1/4 inch, or 3/4 inch. If you need maximum flow/water pressure through the line you should consider a wider diameter line. If you are covering a large amount of acreage, it can be safer to go with a larger diameter line. You may also consider whether you are going uphill or downhill. If you are irrigating downhill, you will not need as much water pressure to irrigate your pastures and can therefore go with a smaller diameter line. Call 417-741- if you have any questions.

Products in the below gallery, for example, are for 1 inch diameter piping. Always check to make sure your irrigation components fit your pipe diameter:

IS HDPE  Irrigation PIPE BETTER THAN PVC PIPE?

PVC is a vinyl polymer, whereas HDPE Irrigation is a petroleum-based polyethylene thermoplastic. Both pipes are resistant to high temperatures. However, When comparing failure rates and events such as rain, stress, wind, heat, or cold, HDPE has been shown to be more durable. 

CAN POLYETHYLENE PIPE BE USED FOR IRRIGATION?

Nowadays most modern irrigation systems rely on high-density polyethylene (HDPE) irrigation piping. It possesses a number of distinct properties that make it an excellent choice for transporting water through irrigation systems & pumping channels. 

WHICH PIPE IS BEST FOR IRRIGATION?

HDPE Pipes are used in modern irrigation systems as they are leakage free, offering superior flexibility, and longer lifespan when compared to PVC. HDPE Irrigation can handle stress & flexibility requirements.

IS HDPE PIPE GOOD FOR WATER?

HDPE pipe is ideal for potable water supply and wastewater applications. Leak-free Fused Joints are among the advantages of HDPE piping systems. Fused joints eliminate potential leak points and shorten installation time. 

If you have livestock irrigation questions. Just reach out:

Once you get the hang of it, setting up your livestock watering system is much like legos. First decide what diameter piping you need, and draw out exactly how you want your system to be set up. Then connect whichever tees, coupler valves, end caps, or other adapters that you need. 

HDPE is an industry-standard for Irrigation Systems. If you are interested in purchasing a High-Quality HDPE Irrigation pipe for your farm then we at Powerflex Fence have a variety of solutions for you. We offer Pipes of various sizes and a wide variety of fittings/adapters. We also offer other farm equipment like polybraid, energizers, fiberglass fence posts, woven wire fences, field fences, gripples, and much more. We offer competitive pricing and reliable customer support.

While high density polyethylene (HDPE) garners high marks as a durable material in many applications,  HDPE cutting boards are popularly known for being used in commercial and restaurant kitchens, but they are not limited to the kitchen. There are many benefits of HDPE cutting boards as compared to other leading materials such as wood and bamboo, which is why HDPE is considered a choice material across many industries. HDPE cutting boards from Acme Plastic are ideal because we specialize in cut-to-size orders that can meet the unique specifications of your needs. Listed below are some chief benefits to using HDPE cutting boards, examples of popular applications, and reasons why it should be a top pick for your next project.

HDPE cutting boards are high quality and durable, which is why they are the preferred material when compared to other alternatives such as rubber, bamboo, and wood. Not only is a HDPE cutting board long-lasting, but it also has a smooth, non-slip, and is easy to clean with hot water and soap. HDPE cutting boards don’t dull knives, have superior tensile strength, and are malleable so it can be adjusted to fit the needs of any project. HDPE cutting boards are also resistant to environmental conditions like mold and mildew—thereby making it an ideal material for underground plumbing to water supplies. HDPE cutting boards are also resistant to a wide range of chemicals including solvents, detergents, and cleaning solutions. HDPE cutting boards are optimal for food and beverage containers since they can be easily sterilized by hot water.
HDPE cutting boards are also easily recyclable and corrosion resistant, making them very sustainable and ideal for an extensive number of applications.

Listed below are some of the most prominent applications that HDPE cutting boards are used within and reasons why it’s the absolute best choice for the project at hand.

Food and Beverage Industry Applications

HDPE cutting boards are one of the most popular forms of plastic used in the food and beverage industry. From food storage containers, cheese molds and frozen food molds, HPDE provides the ideal quality material for custom commercial food grade cutting boards. Commercial kitchens and restaurants trust HDPE cutting boards for their textured surface, non-porous surfaces, and acid-resistant features. A HDPE cutting board can be easily machined, welded, and most importantly can easily remove bacteria, odors, and cleaning fluids from its non-porous surface, which is a quality that has contributed to why it is the most widely used food processing plastic material.

Automotive Industry Applications

Another popular industry for HDPE cutting boards is the automotive industry. Within the automotive space, RVs are a notable example of mobile living space that includes a kitchen area that often incorporates HDPE cutting boards into their countertops to make optimal use of the space. Food trucks are restaurants on wheels, having the same needs and standards of a larger food and beverage establishment, but are confined to a tighter area to churn out high-quality, food-safe products. HDPE cutting board material makes for the safest work surface for food trucks and RVs alike  because of their non-porous surfaces and their anti-contamination features—that make food truck purveyors, mobile homeowners, and consumers  trust the provisions being made from these vehicles.

Fishing Industry Applications

An ideal choice for commercial fisheries, on fishing boats or on docks, HDPE cutting board offer non-porous areas for cleaning and preparing baited fish. HDPE cutting board is durable and can withstand the effects of salt water and moisture without rotting or developing mildew, which is crucial for fish that are caught and sold for consumption.

Marine Applications

HDPE cutting boards can be specifically tailored to marine applications, also known as marine board. HDPE cutting board material is lower maintenance than wood-based alternatives, it is a good fit for various areas on a boat such as galleys and shared areas.

• Handles and Hatches: The negative consequences of a broken handle or hatch could be small accessibility impairment or being unable to access the area of your boat can create a safety hazard, which is why it’s important to choose a reliable material when designing these essential safety features on your boat. HDPE cutting board material is strong, resilient, and moisture-resistant, which will help keep it long-lasting.
• Railings: Railings are critical to ensuring the safety of passengers. Wooden fragments of these rotted structures could cause scratches, or an unexpected break may cause injuries by falling, HDPE cutting board is equipped to withstand the elements and offer stability and durability to your boat’s railings.
• Outside Cabinets and Furniture: HDPE cutting boards resists debris damage more effectively than wood. While wood can become odorous and plagued with mold and algae, HDPE cutting boards resists odors, rot, and most chips and scratches.
• Motor Covers: These covers often withstand significant degradation due to the elements. As the protector of your boat’s engine, keeping the cover in exceptional conditions is important for the life of your boat’s motor, which is why using a durable HDPE cutting board is the best choice for this part of your boat’s anatomy.

Storage Sheds Applications

Due to its impact-, mildew-, and moisture-resistance qualities, HDPE cutting board material is an ideal choice for manufacturing storage sheds. It offers more stability and cleanliness when compared to wood alternative and keeps these storage sheds free from insects and mold, the two leading issues for why items inside of sheds can degrade over time.

The company is the world’s best HDPE Parts(ar,pl,de) supplier. We are your one-stop shop for all needs. Our staff are highly-specialized and will help you find the product you need.

Final Thoughts