How is tinplate sheet made? What raw materials are needed?

As a material widely used in the packaging industry, tinplate sheet has a complex and rigorous production process. It is mainly used for the packaging of food, beverages, chemical products, etc., and has become one of the indispensable materials in modern industry with its excellent anti-corrosion performance, strong mechanical properties and good printing adaptability.

Youngson Product Page

So, how is tinplate sheet made? What raw materials are needed? With these questions, this article will deeply analyze the manufacturing process and raw material selection of tinplate sheet.

What is tinplate sheet?

Tinplate sheet, also known as tin-plated iron or tin-plated thin steel sheet, is a metal composite material made of low-carbon cold-rolled steel sheet through a tinning process. Its main characteristics are good rust resistance, corrosion resistance, excellent processability and surface printability. Initially, tinplate sheet was mainly used for the packaging of canned food because its surface was covered with a thin layer of tin, which could effectively isolate moisture and oxygen in the air, prevent iron containers from rusting, and protect the food inside from contamination.

With the continuous advancement of industrial technology, tinplate sheet has gradually developed into a widely used metal material, which is widely used in packaging food, beverages, paints, chemical products, spray cans and other containers. It not only has the strength of traditional metal materials, but also improves corrosion resistance and extends service life through the tin plating layer on the surface.

How is tinplate sheet made?

Manufacturing process of tinplate sheet:

1. Manufacturing of base steel sheet

2. Annealing and surface treatment

3. Tin plating process

4. Passivation treatment

5. Surface coating

6. Cutting and forming

The manufacturing process of tinplate sheet covers multiple complex processes from the preparation of raw materials to the production of the final product. The manufacturing process can be divided into steps such as the production of base steel sheet, surface tin plating process treatment and final quality inspection. The following will introduce the manufacturing process of tinplate sheet in detail.

Manufacturing of base steel sheet

The production of tinplate sheet first relies on high-quality low-carbon cold-rolled thin steel sheet as the base material. The manufacturing process of this substrate includes three main steps: steelmaking, hot rolling and cold rolling:

    ● Steelmaking: The production of tinplate sheet starts with the steelmaking process, and the raw materials are mainly iron ore or scrap steel. In a high-temperature furnace, iron ore reacts chemically with coke and limestone to produce molten iron. The molten iron undergoes refining processes such as decarburization, dephosphorization, and desulfurization to further improve the purity of the steel. The steelmaking process determines the basic physical and chemical properties of steel, so it is crucial to choose the right raw materials and control the composition of steel.

    ● Hot rolling: The steel billet obtained after steelmaking will enter the hot rolling process through heating and rolling. Under high temperature conditions, the steel billet is rolled into a steel plate of a certain thickness. The purpose of the hot rolling process is to make the steel structure uniform and reduce the thickness of the steel plate through rolling. The steel plate after hot rolling is usually thicker and requires further cold rolling to achieve the required thinness.

    ● Cold rolling: The steel plate after hot rolling needs to be pickled to remove the oxide layer on the surface and then enter the cold rolling process. Cold rolling is to roll the steel plate again at room temperature to further reduce its thickness and improve the surface finish and flatness of the steel plate. In the end, the thickness of the cold-rolled steel plate is usually controlled between 0.2 and 0.5 mm, which is suitable for the manufacture of tinplate sheet.

Annealing and surface treatment

The steel plate after cold rolling has high hardness and stress, which has an adverse effect on the subsequent tinning process. Therefore, the cold-rolled steel plate needs to be annealed to restore the ductility and flexibility of the steel. The annealing process is to heat and slowly cool the steel at a specific temperature to eliminate internal stress and soften the steel plate.

After annealing, the surface of the steel plate also needs to be cleaned and passivated. The purpose of cleaning is to remove oil and impurities on the surface to ensure the smooth progress of the subsequent tinning process. Passivation treatment is to form an extremely thin oxide film on the surface of the steel plate by chemical methods to further improve the corrosion resistance of the steel.

Tinning process

The core process of tinplate sheet is tinning. The purpose of tinning is to cover the surface of the cold-rolled steel plate with a uniform layer of tin to enhance its anti-corrosion performance. The technical requirements of the tin plating process are very high. It is necessary to ensure the uniformity of the tin layer while ensuring good bonding between the tin layer and the steel plate. The tin plating process is mainly divided into two methods: hot-dip tinning and electroplating tinning:

    ● Hot-dip tinning: The hot-dip tinning process is to immerse the steel plate in molten tin liquid under high temperature conditions so that the tin liquid adheres to the surface of the steel plate. The hot-dip tinning process is relatively simple, with a thicker tin layer, and is usually used in occasions requiring higher corrosion resistance. However, due to the thicker tin layer, the surface finish and uniformity are relatively poor, so it is rarely used in modern production.

    ● Electroplating tinning: Electroplating tinning is currently the most commonly used process in tinplate sheet production. This process uses the current in the electrolytic cell to deposit tin ions on the surface of the steel plate to form a uniform tin layer. The electroplating tinning process can accurately control the thickness and uniformity of the tin layer. The tin layer is thin but has a high finish, which is suitable for high-demand packaging containers such as food cans, beverage cans, etc.

Contact us to discuss your requirements of tinplate manufacturer. Our experienced sales team can help you identify the options that best suit your needs.

Whether it is hot-dip tinning or electroplating tinning, the tinning process requires strict temperature control and current density control to ensure that the tin layer is uniform and has strong adhesion. The choice of tin layer thickness depends on the specific application requirements, usually between 1.0 and 15.0 g/m2. Food-grade tinplate sheets generally require a thicker tin layer to provide better corrosion resistance.

Passivation treatment

After tinning, the surface of the tinplate sheet also needs to be passivated. This is a key step that enhances its corrosion resistance by forming a very thin oxide film on the tinned layer. Passivation treatment can effectively prevent tinplate sheet from oxidizing during storage, transportation and use, further improving its corrosion resistance.

Passivation treatment often uses chromic acid passivation or chromium-free passivation technology. Chromic acid passivation can significantly enhance the corrosion resistance of tinplate sheet, but because it contains harmful hexavalent chromium components, it is gradually being replaced by chromium-free passivation processes today as environmental protection requirements become increasingly stringent.

Surface coating

In order to further enhance the performance of tinplate sheet and improve its appearance, tinplate sheet after tinning is usually subjected to surface coating treatment. This process is designed to meet specific application requirements. For example, food packaging cans usually need to be coated with a harmless food-grade coating to ensure packaging safety; while chemical product packaging cans may require a higher anti-corrosion coating.

Common coating materials include epoxy resins, phenolic resins, etc., which can provide additional protection for tinplate sheets to avoid corrosion caused by contact with acids, alkalis, salts and other substances during transportation, storage or use.

Cutting and forming

After the tinning and surface treatment processes are completed, the tinplate sheets will be cut and formed according to different application requirements. Large rolls of tinplate sheets will first be cut to the appropriate size, and then machined into cans, bottle caps or other products.

The accuracy of cutting and forming is crucial to the quality of the final product, especially in the production of food and beverage cans, where the sealing and structural strength of the container need to be ensured. Common forming processes include stamping, bending, deep drawing, etc., which can process tinplate sheets into various complex shapes to meet the needs of different application scenarios.

What raw materials are needed to manufacture tinplate sheets?

Raw materials required for manufacturing tinplate sheet:

1. Low carbon steel

2. Tin

3. Coating material

4. Passivating agent

The manufacturing of tinplate sheet requires not only sophisticated process technology, but also relies on high-quality raw materials. The following are several major raw materials that are essential in the manufacturing process of tinplate sheet.

Low carbon steel

Low carbon steel is the base material of tinplate sheet. It is a steel with a low carbon content (usually between 0.04%-0.12%). The advantages of low carbon steel are its excellent plasticity, ductility and high tensile strength, which are suitable for cold rolling processing and can withstand high temperature treatment in the tin plating process.

The low carbon steel used to manufacture tinplate sheet must have uniform thickness and a flat surface to ensure that there will be no quality problems in the subsequent tin plating and forming processes. Therefore, choosing a suitable low carbon steel base material is the key to tinplate sheet production.

Tin

Tin is the main material of tinplate sheet coating. Its chemical properties are relatively stable. It can form a protective film on the surface of steel to prevent oxygen and moisture in the air from directly contacting iron, thereby effectively preventing iron oxidation and corrosion. The thickness and uniformity of the tin layer directly affect the anti-corrosion performance of tinplate sheet.

The tin used for tinplate sheet tinning requires a high purity, usually above 99%. The source of tin is mainly extracted from tin ore, and after refining, it is made into high-purity tin ingots suitable for electroplating or hot-dip plating processes.

Coating materials

According to different application requirements, tinplate sheet also needs to be surface coated after tin plating. Common coating materials include epoxy resin, phenolic resin, polyester resin, etc. These coatings can not only further enhance the anti-corrosion performance of tinplate sheet, but also provide non-toxic and harmless protection for food packaging, etc.

Different types of coating materials have different heat resistance, chemical resistance and flexibility. Manufacturers can choose suitable coating materials according to specific application scenarios to ensure the service life and safety of tinplate sheet.

Passivator

Passivator is a chemical used for post-tinning treatment. Common passivators include chromate-containing passivators and chromium-free passivators. Passivator forms a passivation film on the surface of tinplate sheet to further improve its corrosion resistance and prevent tinplate sheet from oxidation during storage and transportation.

If you want to learn more, please visit our website Brass Plating Steel Strip manufacturer.

How to get a correct rubberizing of a lid

How to get a correct rubberizing of a lid In order to achieve a correct rubberizing of a round cap, it is considered necessary that the cap is turned at least two full turns during the application of the rubber, with an overlap of about 5 to 10 mm between the end and...

Copper sulfate test in metal containers

The copper sulfate test is a test used in the packaging industry to detect the presence of pores, cracks, or any discontinuity in the varnish film applied on tinplate cans. This test is important to ensure the quality of the protective coating and to avoid corrosion...

Why do club cans rust at the corners after sterilization?

Club cans may experience rusting at the corners after sterilization due to several factors. One of these is improper post-cooling handling, where residual moisture can lead to corrosion, especially if cans are packed while still wet, creating a humid atmosphere that...

when Bpani varnish migration occurs in food cans

BPA (Bisphenol A) migration in food cans occurs when components of the varnishes used in can coatings can be transferred to the contents of the container. This process can occur during prolonged storage or as a result of exposure to certain conditions, such as...

how can I improve the double seam of the cans?

To improve the double seam in canmaking, there are several aspects that can be considered based on the information provided: Closing force control: It is important to adjust the closing force correctly to avoid too tight a seal, which can damage the varnish or eject...

how to make a can body

The manufacturing process of an aluminum beverage can body involves several steps, which are typically carried out on an integrated high-speed production line. Here is a summary of the process: Aluminum coil preparation: The process starts with large aluminum coils,...

how can i control the ph and salts of autoclave water?

To control the pH and salts in the water used in the sterilization process, it is important to follow a series of recommendations: pH Control: Maintain the pH of the sterilization water between 7.00 and 8.00. Higher values may cause blackening of the tin by stannite...

solving a corrosion problem in metal containers during the sterilization process of cans in autoclaves with water drizzle

To solve corrosion problems on metal containers during the sterilization process in autoclaves with water drizzle, several key aspects must be considered: Water quality: The water used for both the thermal process and subsequent cooling must be treated to avoid the...

autoclaves must have relief valves

Yes, autoclaves must be equipped with pressure safety valves. These valves are essential to ensure that the pressure inside the autoclave does not exceed the recommended limits, which is crucial for operational safety. Safety valves allow pressure to be released in a...

What happens if product is cooled in an autoclave without air pressure?

If product is cooled inside an autoclave without air pressure, there could be a risk to the integrity of the container, especially if glass containers are involved. The absence of air pressure during cooling may cause thermal shock to the containers, which could cause...

how do I improve the weld on a container?

To improve the weld on a 610×708 container, several critical factors must be considered based on the information provided: Use of double refrigerated pulley: It is essential to have a welding machine with double refrigerated pulley to obtain a proper weld....

Why can the deficiency of varnish on the inside varnish of the weld be due to a deficiency of varnish ?

The deficiency of varnish in the inner varnish of the weld can be due to several factors. According to the information provided: Varnish porosity is a problem mentioned, which indicates that the applied varnish may contain micropores that do not provide complete...

What is tin plating

Tin plating is the process of applying a layer of tin to another metal. In the context of tinplate used for the manufacture of metal containers, tin plating refers to the application of tin on a steel base to protect it from external corrosion. Tin is a soft, white,...

electrotest in food cans?

The electrotest on food cans is a method used to determine the porosity in internal coatings of cans, especially those with an internal coating and is not applicable to bare cans, cans with aluminum internal coating or cans with zinc carbonate gold varnish. The...

how to generate a good curing of electrostatic powder for tin cans

To generate a good powder cure in the protection of container welds, it is important to follow a series of steps and control certain parameters: Rapid temperature rise: In order to properly melt the powder and keep the tin molten for as long as possible, a rapid...

how to determine the thickness of the tinplate according to the type of metal container

The thickness of tinplate for metal containers is determined by several factors, including the type of container, its end use, and the required mechanical properties. Here are some specific details to consider when determining tinplate thickness: Standard...

How the design of a can affects its usefulness

The design of a can affects its usefulness in several significant ways: Hermeticity: The ability of a container to be absolutely airtight is crucial, as it protects the contents from external agents and ensures its integrity, maintaining the properties of the...

what are the most important features to take into account in the design of a tin can?

The most important features to consider in the design of a canned food can are: Airtightness: It is essential that the container be completely airtight to protect the product and avoid contact with air, oxygen or bacteria that could contaminate it. Protection against...

corrosion of steel in cans

Corrosion of steel in cans is a process in which steel deteriorates due to chemical reaction with its environment, especially in the presence of moisture and oxygen. In the case of food cans, steel corrosion can be a serious problem, as it can lead to food...

Causes of solder start burn out

Possible causes of burning out the weld start may be the following: Welding current too high: If the welding current is too high, it can cause excessive heating at the start of the weld, which can result in a burn. Overlap too small: If the overlap between the welded...

how tinplate elongation influences the drawing process

The elongation of tinplate is an important factor in the drawing process. Elongation refers to the ability of the material to stretch without breaking. In the case of drawing, a tinplate with a higher elongation will allow for greater deformation before fracture...

how the hardness of the tinplate influences the drawing process

The hardness of the tinplate can influence the drawing process in several ways. According to the available information, it is mentioned that the tinplate must have adequate deformation capacity to avoid surface failures during the process. Therefore, it can be...

how does the type of tinplate influence the drawing process?

The type of tinplate used in the drawing process can influence different aspects of the process. The following are some possible influences: Deformability: The deformation capacity of tinplate is an important factor in avoiding surface failures during the drawing...

What information do I need to know to pack food in tinplate containers with BPA NI white lacquer?

For packaging food in tinplate containers with white BPA-NI varnish, it is important to consider the following aspects based on the information provided: Sanitary Requirements and Certificates: Make sure that the containers comply with sanitary requirements and have...

what is the metal exposure test for beverage cans?

The metal exposure test on beverage cans is a quality control measure that tests the interaction between the inner lining of the can and its contents. This test is important because the inner lining of a can is designed to protect the metal from the product it...

Anisotropy in cans?

Anisotropy in cans refers to the fact that material properties vary depending on the direction in which they are measured. This means that cans may exhibit different mechanical or physical behaviors when forces are applied in different directions. For example, in one...

What are the steel materials used for metal containers?

Steel is used for a wide variety of metal packaging applications. It is used in packaging and closures for human and pet food, beverages, aerosols, personal care, household and automotive products, industrial products and paints, gift items and promotional products....

what is tinplate passivation?

Tinplate passivation is a chemical treatment applied after tin deposition that stabilizes the surface characteristics of tinplate by controlling the formation and development of tin oxide. This process is carried out to avoid oxidation not only during manufacturing,...

how does an electrostatic powder machine work to coat the weld?

An electrostatic powder machine works as follows to coat the weld: Dust extraction: The machine extracts the dust from a fresh dust tank, which is protected by several bags to keep the dust in perfect condition. A solids suction hose system is used to extract the...

What is ETP coils?

ETP coils are low carbon steel sheets coated with a thin layer of tin. ETP stands for “Electrolytic Tinplate”, which translates as Electrolytic Tinplate. This type of material is commonly used for the manufacture of metal containers, especially for food...

Can you explain to me how to calculate the applied cost of a varnish?

To calculate the applied cost of a coating, it is necessary to consider several factors including coating consumption, coating cost per unit weight or volume, and other associated costs such as dilution and cleaning solvents used in the coating application process....

causes and possible solutions for tears?

Tears are one of the main problems in the Front End area of the aluminum can production process. causes and possible solutions for tears in the aluminum can production process. Causes of tear offs include: Imperfections in the Aluminum Material: These can be surface...

how can sodium hydroxide affect the tinplate of plain containers?

Sodium hydroxide is an alkaline substance that can cause corrosion on plain tinplate. This corrosion can result in the formation of rust spots. In addition, corrosion can cause product losses if units must be discarded and can contaminate the food when it occurs...

What are the main parts of 2pc can making equipment?

Various equipment and key terms related to the 2-piece (2PC) can manufacturing process: Stamping press: This is a hydraulic plunger press used to stamp a cup-shaped can body from a metal coil. This is one of the first steps in the creation of a 2-piece can, where the...

is electrostatic welding dust, BAPNI in nature, harmful to health?

No, the electrostatic powder used to cover the solder and of BPANI nature (BPA and BPA-NI free). In fact, it has been developed to replace other substances that were identified as potentially hazardous, such as BADGE and its derivatives, and BPA (bisphenol A), which...

what does the riveting machine mandrel do?

The mandrel on a can seamer plays a crucial role during the can seaming process. Its main function is to act as an anvil on which the rollers press when bending the flange and the flange in the formation of the hooks of the fastener. The mandrel can rotate on its...

why do the tabs of peel-off covers lift after sewing?

The lifting of the tabs after sewing in the process of using peel-off film ends (peel-off cap) could be due to several factors. Mostly it would be due to the contact of the lip of the mandrel at the moment of making the double seam on the cans.It could also be related...

Why is it necessary to rapidly cool cans of canned vegetables in the cooling stage of autoclaves?

Rapid cooling of canned vegetables in the autoclave cooling stage is necessary to avoid activation of sporulated thermophiles, including Bacillus coagulans. These microorganisms are responsible for flat souring, a process that ferments food by acidifying it. Although...

What are the possible causes of a mismatch in a can at the time of welding?

Possible causes of a mismatch in a can at the time of welding may include: Incorrect body development: If the body of the can is not the right size, it can create problems when aligning the edges for welding. Improper wire condition, measurement and speed: A welding...

And how can I melt lead-tin solder in a one liter alcohol can?

Lead-tin solder is generally melted by applying heat directly to the alloy. For a one liter can of alcohol, you should follow the steps below:Prepare the area of the can to be welded, making sure it is clean and free of any debris. Apply a flux to the area to be...

open weld on tinplate cans what can be the causes?

Open welding can be caused by several factors. Some of the most common causes may be:Incorrect nitrogen injector setting: It is important to check the nitrogen injector setting to ensure that the correct amount is being injected.Lack of nitrogen or insufficient flow:...

what is the service life of a welding roll?

The documents provided do not specify an exact service life for a welder roll head. However, they do provide some guidelines on when to consider maintenance or replacement. For example, when the minimum diameter of the weld roll or disc is reached, regrinding is not...

Clicking (clip clapping noise) on cans

The “clinking” or “clip clapping” noise in cans, especially in twist-off type closures, can be caused by several factors. Based on available information, some of the reasons why this phenomenon may occur include:Problems in the seaming process:...

sulfuration or black spots on the can interior

Sulfuration or black spots on the inside of cans can be caused by the breakdown of certain proteins that release sulfur ions. These can react with the metallic components of the container, such as iron and tin, producing dark-colored sulfides. This phenomenon can also...

What are the causes of can bulging?

Tin cans can bulge for several reasons:The suitability of the tinplate used: The correct choice of the thickness and especially of the tinning is fundamental. Not all tinplates are suitable for all uses.The use of organic protection, such as varnishes, must be...

Ghost effect in white ink

Ghosting refers to problems in the printing process where an unwanted faint image appears on a printed sheet. However, the details provided focus on mechanical ghosting related to colored inks and do not explicitly mention white ink. Mechanical ghosting can be caused...

Is a rivet drop at Vee critical?

Yes, a “Vee” rivet drop is critical. According to the information provided, the “Vee” is a sharper “V” shaped projection that is seen as a projection of the double seam downward. This defect reduces the rate of overlap and always...

What causes vacuum loss in cans?

Vacuum loss in cans can be caused by several factors. One of them is the bulging or buckling of the base or lid of the container due to excessive internal pressure, which can lead to the seam opening and allow contaminants to enter, especially during cooling, when a...

what does an excellent double seam look like?

An excellent double seam on a can is the result of two separate and precise operations. During the first operation, the rim of the lid is rolled over the flange of the can body, forming three metal thicknesses in the lid and two in the body. In the second operation,...

what is a canned food can?

A tin can is a metal container designed for the storage and preservation of foodstuffs, particularly canned food products such as fish. These containers are opaque and resistant, making them suitable for packaging and preserving liquids and processed foods. Canning...

what is an aluminum beverage can?

A can is a metal container designed to preserve and transport liquids and canned products intended for human consumption. Cans can vary in size, but commonly for beverages, they range from 33 cl to 50 cl. Today, most cans are made of aluminum, although steel or...

what is a can?

A can is a simple metal container designed to protect its contents against weather and nature. It is rigid, unbreakable and requires no special handling precautions. Cans are commonly used to package a variety of products such as carbonated beverages, freshly...

How much should be the minimum headspace in food cans to ensure that the lid is not deformed?

The minimum headspace in food cans should be about 4 to 5 mm, depending on the height of the container, to prevent food residues in the seal area and to avoid deformation of the flanges. In addition, it is advisable to leave a headspace corresponding to at least 6% of...

Double Seam Thickness Calculation in Cans

To calculate the thickness of the double seam, the following formula is used: Thickness of double seam = 2 * thickness of body + 3 * thickness of cover + 0.14 mm This formula takes into account the thickness of the can body, the thickness of the lid and an additional...

what annealing has the tinplate type TH

Tinplate type TH (Tinplate Hard) refers to a tinplate material with a hard temper. However, there is no specific annealing value associated with the term “TH”. The annealing of tinplate may vary depending on the manufacturer and the specific needs of the...

How to reduce can topwall variations

To reduce can top wall variations, it is essential to optimize the drawing and pressing process. The knowledge base provides some insights into this process: Adjust the reduction percentages: For taller cans, the wall thickens toward the top. You can reduce this wall...

How to check the seam on a container

To check the seam on a metal container, follow these steps: Visual examination: Perform a careful visual examination of the entire container, paying special attention to the seams. Look for defects such as edges, dents, edge depressions, peaks, folds, protruding...

Is the roller height related to reverse wrinkling?

Yes, the height of the roll may be related to the reverse wrinkles in the double seam. Reverse wrinkles are formed during the first operation of the sewing process. If the first operation roller is too tight, it may cause reverse wrinkling. To remedy this problem, you...

What adjustment should I make if I see creases in the wrinkle?

If you notice creases in the wrinkle of the double seam for cans, you may consider making the following adjustments: Check the locking or first operation rollers and make sure they are not too loose. Tighten them if necessary. Inspect the rollers for wear and replace...

How to measure the physical properties of a coating

To measure the physical properties of a coating, you can perform the following tests: Varnish film thickness: The most accurate method is to weigh a sample of a given surface before and after removal of the varnish film. Normally a circular disk with a surface area of...

measures for checking the closure of a 3-piece container

Verification of the closure of a 3-piece container, such as a tin can, involves inspection of the double seam that joins the body of the can to the lid and base. Here are some measures that can be used to verify closure: Seam height: The distance between the top and...

what material is used for twist off caps?

Twist-off caps are made primarily from tinplate, which is a thin sheet of tin-coated steel. In addition, they use “sealing elements” in the closure made from polyvinyl chloride (PVC) resins to ensure an airtight seal and maintain the freshness and quality...

can varnish be applied to cover a plate that has already been lithographed with final varnish?

Yes, it is possible to apply varnish on a sheet that is already lithographed and has a final varnish. However, it is important to consider a few factors before doing so: Make sure that the additional varnish is compatible with the existing final varnish. There may be...

What are the parts of a peel off cover?

A Peel-Off cap consists of the following main parts: Ring: It is the circular metallic part that fits on the rim of the container. The ring provides the structure and support needed to hold the lid in place and ensure a tight seal. Aluminum foil: A thin, flexible...

What is foil used in Peel-Off caps?

The foil used in Peel-Off closures is a thin aluminum foil used to hermetically seal the closure ring on metal containers. This aluminum foil is flexible, lightweight and corrosion resistant, making it suitable for maintaining the quality and freshness of packaged...

Difference between Easy Open ends and Peel-Off ends

The main difference between Easy Open End (EOE) and Peel-Off Ends lies in their design and opening mechanism: Easy Open End (EOE): These caps are designed with a ring and a precision cut ring on the inside of the cap. When the ring is pulled, the cutting ring detaches...

Aluminum can compatibility test

Aluminum cans offer several advantages, including compatibility with a wide range of products. Here are some key points about aluminum cans: Aluminum cans are commonly used for food and beverages. They are suitable for both shallow-drawing and deep-drawing cans, which...

Shelf life of canned foods

Canned foods have an exceptionally long shelf life, typically ranging from 1 to 5 years. Metal cans and closures provide a hermetically sealed functional barrier that isolates food contents from sunlight and oxygen, which are the two main factors of premature food...

what is the overpressure autoclave used for?

The overpressure autoclave is mainly used to process canned foods and other types of soft packaging, such as pouches, glass jars, plastic containers and cartons. The overpressure in the autoclave allows maintaining a balanced pressure between the inside and outside of...

At what temperature and pressure do autoclaves work?

The autoclaves work at different temperatures and pressures depending on the height of the canning plant. For example, at sea level, an autoclave heated to 120°C (248°F) will have a gauge pressure of 14.1 PSI. However, at meters ( feet) above sea level, at...

how is the sterilization process in the canning industry?

The sterilization process in the canning industry is a critical step to guarantee the safety and quality of canned products. This process involves subjecting canned products to high temperatures to eliminate microorganisms and ensure commercial sterility. The general...

Causes of tin can flanges cracked by welding?

Cracked flanges in the welding of metal containers can be caused by several factors. Some of the most common causes include: Incorrect welding parameters: If the welding current, machine speed or welding roll pressure are not set correctly, it can cause cracked tabs....

why the flanges of tinplate food cans are cracked

The flanges of tinplate food containers can crack due to several factors: Use of thin and hard materials: When thin and hard materials are used, the tampon flanging technique may result in breaks or cracks at the edge of the flanges, especially in small diameter...

blistering or bubbling in the varnish on metal food cans

Blistering is a phenomenon that occurs in metal cans, especially in the weakened areas of the pannelling, where bubbles form due to acid attack. These bubbles can compromise the integrity of the can and affect the quality and safety of the packaged food. Blistering...

How a necker station works

A necker station is a part of the aluminum beverage can production process in which the diameter of the top section of the can is reduced to accommodate the smaller end. This is how it works: The can, which is still cylindrical, is loaded onto an elevator. The axial...

What is the purpose of the separator ring and pilot ring on the bodymaker machine?

The separator ring and pilot ring are essential components of the body forming machine, which is used to manufacture aluminum beverage cans. These rings play a crucial role in the ironing process, ensuring that the cans are formed accurately and uniformly. Separator...

What cooling systems are available for the operation of a Bodymaker?

Cooling systems play a crucial role in the operation of a bodybuilder. Here are some key points related to Bodymaker cooling systems: Coolant: The body builder needs a constant flow of coolant at a rate of 80-120 liters/min at 40°C (21-32 gallons/min at 104°F). No...

How to remove wrinkles in the double seam?

To eliminate or reduce wrinkles in the double seam, you can follow these tips: Adjust the roll pressure: Make sure that the roll pressure is correctly set so that the material is folded evenly during closing operations. Increase the number of turns in the first...

The TFS material reacts to the copper sulfate test ?

TFS (Tin Free Steel) is a type of steel coated with a layer of chromium instead of tin. The copper sulfate test is mainly used to evaluate the quality and continuity of the varnish coating on metal cans and containers. In the case of TFS material, if a varnish is...

metal cans for canning

Metal food cans are containers made mainly of steel or aluminum, designed to preserve and protect canned foods. These containers are very popular due to their durability, corrosion resistance and ability to maintain food quality and freshness for long periods of time....

heat penetration test

The heat penetration test is a test performed in the sterilization and preservation process of packaged foods, such as canned or pouch products. The purpose of this test is to determine the effectiveness of the sterilization process and to guarantee the safety and...

WHAT IS INCUBATION IN METAL CONTAINERS FOR?

Incubation is performed in the microbiological analysis process to promote the growth and proliferation of microorganisms present in a sample. By maintaining the proper temperature and time conditions, microorganisms are allowed to multiply and are easier to detect...

how to check pouch sealing

To check the seal of a pouch, you can follow these methods: Visual inspection: Verify if the seal is uniform and continuous, without wrinkles, folds or deformations. Make sure the seal is of adequate width, usually at least 3 mm. Water tightness test: a. Fill a...

Failure of water stain washing machine cans

Water stains on cans after the washing process may be due to several factors. Here are some possible causes and solutions: Water quality: Make sure that the water used in the can washer is of good quality and does not contain minerals or impurities that may cause...

HOW TO FIX DOUBLE SEAM WRINKLES?

To fix double seam wrinkles, you can follow these remedies based on the potential causes: Clincher or first operation rolls set too loose: Readjust the first operation roll to the correct tightness. Worn rolls: Replace the worn first or second operation rolls with new...

How to eliminate reverse wrinkle

To eliminate reverse wrinkles in double seams, you can follow these steps: Adjust the 1st operation roll: Reverse wrinkles are often caused by the 1st operation roll being too tight. Check the tightness and adjust it accordingly to ensure the proper pressure is...

What are the causes for Vees forming in the cover hook

Vees are irregularities in the double seam due to insufficient or no overlap between the cover and body hooks. They appear as “V” shapes around the bottom edge of the cover hook radius. Some causes for Vees forming in the cover hook are: Loose 1st...

displaced wing in aerosol background stamping

The occurrence of displaced wings in the printing of aerosol bottoms may be due to several factors. Here are some possible causes and solutions: Die wear or damage: Ensure that the die is in good condition and does not have excessive wear. If necessary, replace or...

Water Stains in aluminum Metal Cans

Understanding and Preventing Water Stains in Metal Cans Introduction Water stains are a common defect that can occur during the manufacturing process of metal cans. These defects can affect the appearance and quality of the cans, potentially leading to customer...

sulfite reducers in food cans

Reducing sulfites are compounds that contain sulfur and oxygen and have reducing properties. They are commonly used in the food industry as preservatives and antioxidants. Reducing sulfites can help prevent the growth of bacteria and fungi, as well as protect foods...

swollen can

A swollen can may be a sign of a problem with the contents of the container. There are several reasons why a can may swell, and some of them may pose a health risk. Here are some possible causes of a swollen can: Bacterial contamination: If bacteria enter the...

hard swell in canned food cans

A “hard swell” is a type of swelling in a can where both ends of the can are bulging and cannot be flattened without applying pressure. Unlike a soft swell, where the swelling yields under manual pressure, in a hard swell no impression can be made manually...

packaging temperature in the canning process

Packaging temperature is an important factor in the canning process, as it can affect the quality and safety of the canned product. According to the information in my knowledge base, it is mentioned that the containers should be cooled as quickly as possible to an...

how is the cooling of cans after autoclaving?

Can cooling is an important step in the canned food packaging process. After the cans have been sealed and subjected to heat treatment, such as autoclave sterilization, it is necessary to cool them adequately to ensure the quality and safety of the packaged...

for which steam is applied to the can in the seaming process

The use of steam in the canning process is a common technique to remove air and create a partial vacuum in the headspace of the can. By expelling oxygen, can corrosion is retarded and lipid oxidation is prevented. In addition, the vacuum created inside the can helps...

it is dangerous to handle hot containers when they come out of the autoclave

Yes, it is dangerous to handle hot containers when they come out of the autoclave. Hot containers may have expanded closures, which makes their handling a bad practice due to possible infiltration or microbiological contamination after thermal processing. For this...

Recommendations for can coatings

 Varnishes play a crucial role in the protection and decoration of metal cans. Here are some recommendations for different purposes: Interior varnishes: To protect the contents of the can from corrosion and maintain the quality of the product, it is essential to...

What is the electrostatic powder coating layer in can welding?

Electrostatic powder coating in can welding is applied to protect the weld zone and prevent metal exposure. Here are some approximate specifications for a “super-wima” type electric welded container: Coating width: Bare container interior: 6 to 7 mm Inside...

What does DR on tinplate mean

DR on tinplate refers to “Double Reduced”. It is a type of tinplate that has undergone an additional reduction process compared to Single Reduced (SR) tinplate. The double reduction process involves two cold rolling steps, resulting in a thinner and...